-
通用測量儀器
-
人工智能
-
FPGA開發平臺
-
實驗教學設備
-
虛擬仿真平臺
-
智能制造
友晶科技 FPGA開發板 DE4
發布時間:2021-06-04 瀏覽次數:2108
FPGA 芯片
Stratix IV GX EP4SGX230
-
228,000 logic elements (LEs)
-
17,133K total memory Kbits
-
1,288 18x18-bit multipliers blocks
-
2 PCI Express hard IP blocks
-
744 user I/Os
-
8 phase locked loops (PLLs)
Stratix IV GX EP4SGX530
-
531,200 logic elements (LEs)
-
27,376K total memory Kbits
-
1,024 18x18-bit multipliers blocks
-
4 PCI Express hard IP Blocks
-
744 user I/Os
-
8 phase locked loops (PLLs)
FPGA 配置
-
JTAG and Fast Passive Parallel (FPP) configuration
-
內建 USB Blaster 電路
內存
-
64 MB Flash with a 16-bit data bus
-
2 MB ZBT SSRAM
-
I2C EEPROM
Two DDR2 SO-DIMM Sockets
-
400 MHz clock rate
-
Maximum theoretical bandwidth of over 102 Gbps
-
Up to 8-Gbyte capacity in total
SD Card Socket
-
支持 SPI 以及 SD 1-bit 兩種 SD Card 讀取模式
按鈕,開關與 LED
-
4 個按鈕
-
4 個滑動開關
-
8 個 LED
-
8 位 DIP 開關
2 個七段數碼顯示管
On-Board Clocks
-
3 Programmable PLLs configured via FPGA
-
o HSMA, HSMB transceiver clock source
-
o SATA reference clock
-
o FPGA LVDS clock input
-
50MHz/100MHz oscillator
SMA 接頭
-
2 SMA connector for external transceiver clock input
-
4 SMA connector for LVDS clock input/output
-
2 SMA connectors for clock output
-
1 SMA connector for external clock input
4 個 SATA 接口
-
Support SATA 3.0 standard 6Gbps signaling rate
-
Two host and two device ports
4 個千兆以太網接口
-
Integrated 1.25 GHz SERDES
PCI Express x8 Edge Connector
-
Support connection speed of Gen1 at 2.5Gbps/lane to Gen2 at 5.0Gbps/lane
-
Connection established with PC motherboard with x8 or x16 PCI Express slot
Two 172-pins High Speed Mezzanine Card (HSMC)
-
2 female-HSMC connectors
-
I/O voltage 2.5V
-
Total of 12 high-speed transceivers at 8.5 Gbps
-
Total of 38 LVDS pair at 1.6 Gbps
兩組40個接腳擴充槽
-
72個 I / O引腳及4個電源和接地線,拉到40-pin 擴充槽
-
用于40-pin 擴充槽的排線可利用 IDE 硬碟專用的40-pin 排線
-
I/O voltage 3.0V
USB主/從控制器
-
完全符合通用串行總線規范2.0修訂版標準
-
支持數據高速傳輸、全速傳輸與低速傳輸
-
Support both USB host and device
-
3種USB 接口 (one type mini-AB for host/device and two type A for host)
-
支持PIO與DMA模
電源
-
DC input 12V and 3.3V
-
PCI Express edge connector power
-
Support PCI Express external standard power source
-
On-Board power measurement circuitry